Wearable digital magnification system

FALKO X5, digital magnification that focuses on its own

6x at 25 cm, 5x at 40 cm, 4x at 50 cm, with continuous autofocus. No custom working distance and no custom optical fitting.

maximum magnification at 25 cm
0 x
working range with autofocus
25– 25 cm
indicative battery life
0 h
video latency
< 0 ms

How it works

THE MAGNIFICATION SYSTEM THAT ADAPTS TO THE CLINICIAN

Magnification should deliver precise detail without restricting freedom of movement.

During a procedure, the clinician changes position, distance and viewpoint, moving from a detailed view to a wider view of the operative field.

With FALKO X5, the operative field is captured digitally and shown directly in the headset, and the focus adjusts automatically. No custom working distance or custom optical fitting is needed.

How it’s built

FOUR COMPONENTS, ONE SYSTEM

FALKO X5: autofocus camera, micro-OLED display, LED light and video processing module
Integrated LED lightCircular spot with adjustable intensity and an orange filter to prevent premature composite curing.
Digital camera with autofocusCaptures the operative field and keeps it in focus between 25 and 50 cm.
Micro-OLED displayThe magnified image appears right in front of your eyes.
Video processing moduleProcesses the camera’s video signal for the display.

Distance and magnification

STEP BACK, THE IMAGE STAYS IN FOCUS

As you move closer to the operative field, magnification increases up to 6x. As you move back, it decreases to 4x, giving a wider view, up to the full mouth. Continuous autofocus keeps the image sharp across the entire working range, from 25 to 50 cm.

You can also switch to a direct view of the patient without lifting the headset.

Operative field at 25 cm: 6x magnificationOperative field at 40 cm: 5x magnificationOperative field at 50 cm: 4x magnification
5xat 40 cm
5xat 40 cm

Continuous autofocus across the entire working range.

25 cm40 cm50 cm

Key benefits

DESIGNED FOR EVERYDAY PRACTICE

The operative field before your eyes

A single magnified digital image, shown directly in the headset.

From detail to patient

From magnified view to direct view, without changing position.

Integrated light

Circular LED spot, adjustable and switched on when needed.

Continuous autofocus

6x at 25 cm · 5x at 40 cm · 4x at 50 cm, always in focus.

Comparison

FROM OPTICAL LOUPES TO DIGITAL: WHAT CHANGES

Optical loupesFALKO X5
MagnificationFixed, chosen at purchase6x at 25 cm · 5x at 40 cm · 4x at 50 cm
FocusAt a set working distance, with limited depth of fieldContinuous autofocus between 25 and 50 cm
CustomisationCustom working distance; on TTL models, custom-mounted opticsNo custom working distance or custom optical fitting
Direct viewLooking over or under the ocularsFrom detail to direct view without lifting the headset
IlluminationAdd-on, depending on the modelIntegrated as standard, adjustable, with an orange filter
Type of viewOptical, stereoscopic2D digital, on a micro-OLED display

Based on the typical features of optical loupes: individual models may differ.

Clinicians

FALKO X5 IN CLINICAL PRACTICE

Dr G. Guidi working with FALKO X5
Dr G. GuidiOral surgery & implantology · Pesaro
Dr F. Profili working with FALKO X5
Dr F. ProfiliDental hygiene · Osimo (AN)
Dr A. Gandolfi working with FALKO X5
Dr A. GandolfiProsthodontics · Bologna
Dr A. Delfino working with FALKO X5
Dr A. DelfinoProsthodontics · Naples

Technical specifications

SPECIFICATIONS AND DOCUMENTS

Magnification6x at 25 cm · 5x at 40 cm · 4x at 50 cm
FocusContinuous autofocus across the entire range
Working range25–50 cm
Video latency< 50 ms
IlluminationIntegrated as standard, adjustable intensity, circular spot, orange filter
Battery lifeapprox. 8 hours
Regulatory complianceCE marked under Regulation (EU) 2017/745 (MDR)

Frequently asked questions

FAQ

Can I use FALKO X5 if I wear glasses?

Yes. The headset has independent dioptre adjustment for each eye, compensating for myopia up to −5.0 dioptres. In other cases, the headset adjusts to leave room for your glasses.

Does FALKO X5 need to be connected to a computer?

No. FALKO X5 is standalone: the camera captures the operative field and the image appears directly in the headset.

Can I record or share footage?

Not with FALKO X5: the image is shown only in the headset. To record and share footage, and to view CBCT, intraoral scans or guided surgery software in the headset, choose FALKO 3D Magnification. It connects to the practice PC and includes MagnoCam software, which saves photos and videos to the patient’s record and lets you share your view in real time for training and telementoring. Discover FALKO 3D Magnification →

Does it need custom fitting, like loupes?

No. FALKO X5 requires no custom working distance or custom optical fitting: the autofocus works between 25 and 50 cm. This means the same headset can be used by different clinicians in the practice.

WANT TO FIND OUT MORE OR TRY FALKO X5?

A Tecnomed Italia Product Specialist will be in touch to give you all the information you need and, if you wish, arrange a demonstration.

FALKO ecosystem

EXPLORE THE OTHER DEVICES

FALKO 3D Magnification: ripresa del campo operatorio, CBCT e scansione intraorale nel visore

FALKO 3D

FALKONNECT 3D

OKKIO

INTERA System

The project, its evolution and awards

© 2026 Tecnomed Italia S.r.l. – Terms of use

Tecnomed Italia s.r.l. Via Salvador Allende n.2, 61040 Castelvecchio di Monte Porzio (PU) Italy · Phone +390721955125 · Share capital €110,000.00 fully paid-up · R.E.A. PU no. 165785 · Company reg. no. PU 02246170415 · Tax code / VAT no. IT02246170415 · Code IT02246170415

Request more information

Fill in the form and your local Tecnomed Italia specialist will be in touch to answer your questions or arrange a demo.